What the board helps:
To an electronics hobbyist that how to build circuits easily and economically？
One method is using a PCB that requires processes such as platemaking, etching, and soldering. This solution is only valuable for more mature circuits. For prototype systems, or electronic testing, this solution is too time consuming and expensive.
High-end dot matrix universal test circuit board is a better way for that. The pitch of the board is a standard 100 mil (2.54mm) distance. The ICs or components can be conveniently inserted, and the circuit connection can be directly used from the component pins or connected by a single strand of hard wire.
This kind of board cutting is also very convenient. Use a utility knife to draw it, then put it on the edge of the table and it will be OK! The board can be used to make electronic products, test circuits, learning basic circuit knowledge etc, a good mate to enter the electronics world.
- Quality material with advanced techniques
- Material: Single side copper PCB
- Hole Diameter: about 1mm
- Hole pitch: Standard 2.54mm
- Apply to: Point-to-point DIY soldering
- Item size: 7x5cm
- Thickness: about 1.2mm
- Net weight: 50g
What’s in the package:
- 10 x Single-side Prototype Paper PCB Universal Circuit Board