- Synchronized dual Z system: ensure both side of the gantry move ups and downs the same height, at the same speed, ensure the X carriage always move parallel to the build plate, even when one of the Z stepper breaks down.
- Self developed ultra quiet driver: noise created by 3D printers is always a problem to trackle. With months research and testing, we developed a new ultra quite stepper driver, which dissipate much less heat and maintaining a higher torque comparing to other quiet stepper drivers available.
- Power failure recovery: have you ever tripped over the power cord and lost a long hours print? SW-X1 will save you from the loss of the power. When it recover from a power failure, continue with printing.
- Filament sensor: the mechanical filament sensor detects the presence of a filament. The SW-X1 can recognize running out of the filament, pause the print and ask the user to insert a new spool.
- Fast heating AC heatbed: reaching 110 degree centigrade in 5 minutes, no more waiting for build plate to heat up, especially in the winter.
- Branded power supply unit: with branded power supply unit, it provides stable and sufficient power to the machine, an unstable power supply unit may cause trouble to your machine, interruption to your long hour print.
- Direct driver extruder: it makes your printer more reliable, especially from flexible filaments.
- Large nut design: more convenient for leveling.
- Layer Resolution: 0.1mm
- Frame: Aluminum Extrusion
- XY-axis Positioning Accuracy: 0.05mm
- Z-axis Positioning Accuracy: 0.1mm
- Printing Filament: PLA, ABS, TPU, Flexible Materials
- Filament Diameter: 1.75mm
- Nozzle Diameter: 0.4mm
- Machine Dimensions: 550*405*640mm / 550*405*870mm (with spool holder)
- Machine Weight: 15.5kg
- Maximum Print Speed: 150mm/s
- Recommended Print Speed: 60mm/s
- Maximum Travel Speed: 250mm/s
- Build Volume: 300*300*400mm
- Extruder Type: Titan Extruder (Direct Drive)
- No. of Extruder: 1
- Maximum Build Plate Temperature: 130C
- Power Requirement: 600W max (with heated bed turned on)
- Connectivity: USB, TF Card, USB Stick
- Control Board: MKS Gen L
- Nozzle Type: Volcano
What’s in the package:
- 1x Artillery Sidewinder SW-X1 3D Printer
LEARN MORE ABOUT THE SW-X1 3D PRINTER
THE PRINTING QUALITY